| To protect the teeth of this demolition equipment from overload damages, a friction coupling is integrated in the spur gear driven Slew Drive SP-OP 0580 (OP= “overload protected”). |
To top Slew Drive WD-LC 0419 installed in a rotation and tilting device of an excavator shovel bucket. | |
To top | Tandem asphalt compaction roller uses untoothed Slewing Rings as a steering bearing (some designs are partly coated on the surface to prevent corrosion). In the split roller, Slewing Rings with special seals are used.
|
To top
The vibratory roller of the refuse compactor in the picture uses untoothed Slewing Rings in the knuckle joint. | |
To top |
Slew Drive of series SP in a special design for a foundation grab of a heavy construction machine. |
To top
Cement mixer equipped with a conveyor belt with a length of 650 in, which is rotated with two WD-LC 0419; the considerable length of the belt leads to high tilting moments. Therefore a double row design with a reinforced housing is used. |
Print this page
Generate PDF
