IMO: Product details


	Slewing Ring
	Slew Drive Product Line Overview
		Series WD-L
		Series WD-LA
		Series WD-H
		Series SP-L
		Series SP-I
		Series SP-M
		Series SP-H
	Series Overview
	SP-H 0455/2-05910 SP-H 0555/2-05911 SP-H 0655/2-05912 SP-H 0755/2-05913 SP-H 0855/2-05914 SP-H 0955/2-05915

SP-H Series

Print this page

Forward this page

Add to favourites list

Generate PDF

Size 0955

inch

Please note: Dimensions in fps-system (inch)

Section A - B

Mounting holes
Y = 30 Holes M20 - 1.575 deep, equally spaced
Z = 30 Holes ø0.866, equally spaced

Lubrication ports
4 Taper type grease nipples on the internal diameter
2 Taper type grease nipples on the outside of the housing

Slew drive supplied pre-lubricated

Note, mounting face against upper surface shall be ø37.598, minimum

Download *.sldprt

Drawing reference number SP-H 0955/2-05915

Module

[mm]

Number of teeth, wheel

z₂

[ - ]

134

Number of teeth, pinion

z₁

[ - ]

Overall gear ration

[ - ]

161.69

Maximum torque

M_{d max}

[ft-lbs]

38,270

Nom. torque SF = 1 at n = 3 rpm

M_{d nom}

[ft-lbs]

26,804

Maximum holding torque*

M_h

[ft-lbs]

38,270

Static load rating, radial

C_{o rad}

[lbs x 1,000]

252

Static load rating, axial

C_{o ax}

[lbs x 1,000]

675

Dynamic load rating, radial

C_rad

[lbs x 1,000]

Dynamic load rating, axial

C_ax

[lbs x 1,000]

Weight

[lbs]

706

*Optional with brake

The selection of the hydraulic / electric motor depends on actual customer requirements and specifications.
Selection example: performance data with hydraulic motor 2-132


Pressure differential	Δp	[psi]	2,828
Oil flow	Q	[gal(US)/min]	18.5
Output speed	n	[rpm]	3
Maximum achievable torque	M_d	[ft-lbs]	38,270

Limiting load diagram for ‘compressive’ load

Search for drawing number

Slewing Rings
Slew Drives

Infodesk

	Slewing Rings
	IMOsearch Productsearch
	Technic & Service Center including the application data sheet
	Conversion tool

Favourites list (0 products)

Delete favourites list


Slewing Rings (0 products)

Slew Drives (0 products)